Go Simply Connect Integrated Strain Reliefs (Simply45-B002) for Simply 45 Cat6/Cat6a (100pcs)
Simply45® Integrated Snagless Strain Reliefs for Simply45® Brand UTP & Internal Ground STP Pass-Through & Standard RJ45 Mod Plugs, Commercial Rated UL94 V0. Not for Cat5e UTP (See part: S45-B001)- Clear- 100 pcs/Resealable Bag.
The Simply45® S45-B002 – Integrated Snagless Strain Reliefs lock into the RJ45 modular plug so that both the plug and strain relief can be permanently attached to the Simply45® RJ45 modular plug during the crimping cycle.
The Simply45® S45-B002 strain reliefs extend the useful life of the RJ45 modular plug termination and should be used with all terminations. It is also Fast and Easy to Use.
The S45-B002 is designed to work with the following Simply45® pass through RJ45 modular plugs: S45-S1600, S45-1700, S45-1700P
Check out our blog on Simply45.
So Simply Connect Integrated Strain Reliefs for Cat6/6a and Cat5e Shielded with Internal Ground Features:
- Prolongs Life of the Termination. The S45-B002 takes the strain off the terminated plug. When you do not use a strain relief, any contact with the plug or cable puts strain directly on the terminated plug. Over time this could cause one or more of the RJ45 pins to become loose. If a pin becomes loose it will create electrical resistance. Resistance creates heat. This could then cause performance problems or damage to the device socket.
- Commercial Rated UL94 V0. The Simply45® S45-B002 RJ45 modular plug strain reliefs are UL94 V0 (IEC 60695-11-10) rated for all commercial installations. These strain reliefs are recommended for CMP Plenum, CMR, CM; and LSZH up to B2ca rated LAN cables.
- Narrow Design for Easy Access. The S45-B002 strain reliefs are the same width as the RJ45 modular plug. Most common strain reliefs slide over the RJ45. This makes the terminated connector much wider and difficult to use in multi-port patch panels and devices. Therefore, many installers decide to forgo using strain reliefs. The Simply45® S45-B002 strain reliefs lock into the plug during termination and maintain a very narrow profile. This allows easy accss to the plug in these tight installations.
- Maintains Correct Bend Radius of the Termination. The Simply45® S45-B002 Integrated Strain Reliefs protect the terminated RJ45 from damage during the life of the link or channel. Maintaining industry standards bend radius is important for maximizing the link/channel performance.
- Professional Finish. In addition to protecting the termination and extending the operating life of the link/channel, the S45-B002 strain reliefs also provide a professional finish to your terminated RJ45.
- Trimmable. The S45-B002 strain reliefs are trimmable so that you can adjust the bend radius if necessary to work in very tight installations.
- Clear Color. The S45-B002 strain reliefs come in a clear color so that it easily works with all of the Simply45® RJ45 modular plugs indicated above.
- Snagless Design. The S45-B002 strain reliefs are a snagless design. This prevents broken latch tabs on the RJ45 modular plugs.
- Wide Mouth Resealable Bag for Easy Hand Access. No need to spill RJ45 mod plugs out of the bag just to reach them. The S45-B002 strain reliefs bag packaging stands up and can remain open so that you can easily reach in and remove the strain reliefs.
- PoE/PoH Rated. The S45-B002 strain reliefs are ideal for PoE/PoH applications. They are Commercial Rated UL94 V0 to match their RJ45 modular plugs.
- Lifetime Warranty. Offers a Limited Lifetime Limited Warranty.
View our full range of Simply45 Products.
Go Simply Connect Integrated Strain Reliefs Cat6
About Simply45
Simply45® is the industry-leading brand for RJ45 modular plug innovation and performance solutions.
Our founders are leading developers and manufacturers of twisted pair cabling and RJ45 connections. They have been leaders in Category cable development for over 20 years and have over 100 years of combined experience with twisted-pair cabling and RJ45 modular plugs. They also pioneered the development of HDBaseT® Category Cables which were the first-time industry-standard category cables that were re-engineered to improve networking performance required to support new generation LAN cable applications.
The genesis for Simply45 started in 2014 with pass-through RJ45 modular plugs. The concept for pass-through RJ45 plugs was brilliant. However, our founders realized that there were problems with the pass-through RJ45 plugs that were then commercially available.
We started out by asking 3 simple questions:
- How can we re-engineer the pass-through RJ45 modular plug to improve the quality and performance for today’s applications?
- How can we make our solution easier to use?
- How can we do all of this and still make it more affordable?
In 2019 Simply45 LLC was born with the launch of our Pass-Through RJ45 series. We re-engineered the pass-through RJ45 from the ground up… improving performance and reliability as never before. The Simply45 RJ45 solutions are so ground-breaking that we filed several patent applications on our designs and features.
Key Features of our Pass-Through RJ45 Product Line Series include:
We were the first to use 3-prong 24ct gold plated pins that lower resistance and improves signal conductivity.
We were the first to use UL94 V0 (IEC 60695-11-10) plug materials that are important for PoE/PoH applications and are Commercial Rated for CMP Plenum and LSZH B2ca rated LAN cables.
We were the first to color code the RJ45 mod plugs to make them easier to identify and match the recommended LAN cable wire conductor sizes and overall cable diameters.
We were the first to internally modify the pass-through RJ45 to improve the performance of shielded 10G cables such as Cat7a/7/6a.
And so much more that we can proudly say that Simply45 is… Simply Better Quality… Simply Easier to Use… and Simply More Affordable.
Since our initial product launch, the Simply45 product line continues to grow with the introduction of our Pass-Through RJ45 ProSeries and our Standard WE/SS 8P8C RJ45 product lines.
